There are two types of garage door springs available for the garage doors. You can use a torsion spring or extension spring. With the passage of time, these springs become ruined which need professional assistance such as, Nando’s Garage Door Repair to get them fixed based on the type of spring installed in your garage.
Garage door torsion springs are the most dangerous and complicated type to handle. They are found on a rod over the top of the garage door opening. They are two of them mounted on each side of the garage door right at the center position.
Often when one spring is getting damaged, the other will follow it shortly so, it is commonly recommended that both springs should be replaced even if there is only one of them broken. It will also save you from using another service within a shorter period of time. Keeping in mind that such a project is considered dangerous which capable of causing serious injuries or even death. It is strongly suggested that you hire a professional garage door expert for this project.
Garage door extension springs according to the professionals are easier and safer to handle. These types of springs are placed along the upper, right, and left tracks of a garage door. The project still poses risks so safety precautions should always be followed.
Holding a great amount of pressure, these devices can be stretched and released to be potentially dangerous as they are used to lift 400 pounds garage doors. Although people would try and have attempted to adjust and replace the garage door successfully, it is important to determine your own skills related to the demands and dangers that the work would impose. In case of any confusion, it would be wise to consult a professional garage door spring repair service.
While replacing your garage door springs, you will have to make sure that you have collected the right parts and tools. It can be frustrating discovering the correct part. Garage door companies are allowed to sell their products to authorized dealers and retailers.
They do not sell springs to end consumers in order to avoid injuries that may happen when a user is not familiar with the mechanism of a garage door. Replacing the garage door springs is a real and deadly hazard. It is also true that you save some money if you conduct a DIY garage door project but these saving are hardly worth it if you get injuries or are killed by broken springs. It does not mean that you are not capable of handling such a project. The point is that there is no need to take unnecessary risks if there are ways to avoid them.